MUTOH Rockhopper II Series Dokumentacja Pobierz pdf (Strona 168)

100

101

Rockhopper II series printers – Maintenance Manual

169

AP-74065, Rev. 1.2, 27/09/04

5.5.9. P_REAR sensor position adjustment menu

Adjust the P_REAR sensor position in order to accurately detect the length of the cut media.

During this adjustment, the P_REAR sensor position can be adjusted inside the firmware by referring to the

nozzle, in order to obtain a maximum printable area starting from the ends of the media.

Make adjustments following the steps below.

Step 1 : Set media as necessary.

Notes :

¾ Use cutting media for adjusting the P_REAR sensor. Set A3 cutting media in

portrait orientation.

¾ P_REAR sensor position adjustment is a process necessary during manufacturing.

This does not need to be done when band feed is compensated.

Step 2 : After the media has been set, a pattern printing with the P_REAR sensor position adjustment is

performed.

The following is the description of the printing method.

¾ Draws a horizontal line (black 1 dot line) 17 mm away from the media end.

Step 3 : Measure the distance from the media end to the line just drawn.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 318 319

Komentarze do niniejszej Instrukcji

Brak uwag

MUTOH Rockhopper II Series Dokumentacja Strona 168

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukuj i skanuj MUTOH Rockhopper II Series