MUTOH Rockhopper II Series Dokumentacja Pobierz pdf (Strona 150)

Rockhopper II series printers – Maintenance Manual

151

AP-74065, Rev. 1.2, 27/09/04

5.5.1. Skew Check Menu

In this menu, you can perform media feed and check the degree of skew in the media feed operation by

means of the sensors.

When you select this item from the Adjustment menu, the machine feeds the length specified by the

operation panel and checks for media feed skew by comparing the media edge positions before and after the

media feed detected by the sensors.

Notes :

Before performing skew check, ensure that the media is set correctly.

Since the reference position where media has been set is determined the first time the

media left edge is detected, errors may result as follows if the media is not setup

correctly.

¾ Media errors occur during skew check and the operation stops.

¾ "Undefined Media" occurs frequently during media initialization when the power is

turned on or media is cut.

* Check Skew *

0.1 m – 10.0 m +

1.0 m - Set per 0.1 m

↓ ENTER

* Check Skew *

Set Paper When media is not set

↓ Media set

* Check Skew *

Paper Initial

↓ Finishing media initialization

* Check Skew *

Exc. Skew

↓ Finishing media edge detection normally

* Check Skew *

SkewResult + 0.010 mm

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 318 319

Brak uwag

MUTOH Rockhopper II Series Dokumentacja Strona 150